La Marcha Federal Universitaria volvió a llenar las calles de Buenos Aires y de todo el país con una masiva expresión en defensa de la educación pública. Estudiantes, docentes, no docentes y distintos sectores sociales confluyeron frente al Congreso para exigir el financiamiento adecuado de las universidades y rechazar el veto presidencial. La movilización dejó imágenes contundentes: carteles, banderas, cánticos y una marea de personas que recordaron que la universidad es un derecho conquistado. A continuación, compartimos algunas fotos que muestran cómo se vivió esta jornada histórica de resistencia y unidad popular.
En Bahía Blanca la marcha vale por dos, el pueblo se sintió en las callesLa marcha gigante de Bahía BlancaLa marcha mendocina. Las calles de San Rafael se hicieron sentirEn la marcha de San Rafael, Mendoza, se produjeron incidentes: la policía empujó y arrojó gas pimienta a los manifestantes entre los que se encontraba el Intendente Omar Félix quien también resultó afectado Los jujeños salieron a las calles de San Salvador de Jujuy en el marco de la marcha universitaria, una movilización que tuvo como eje el rechazo a los vetos presidenciales a las leyes de Financiamiento Universitaria y Emergencia en Pediatría.Unos minutos después de las 15:30 comenzó este martes una masiva movilización en el marco de la Tercera Marcha Federal Universitaria en varias localidades de Misiones. La convocatoria en Posadas, que acompaña la protesta nacional, partió desde el tradicional Mástil de la ciudad y se dirigió en bloque hacia la plaza 9 de Julio. También hay concentraciones en las localidades de Oberá y Eldorado. https://www.primeraedicion.com.ar/nota/101042035/comenzo-la-marcha-federal-universitaria-en-misiones/Mas de cien mil personas se movilizaron en Córdoba, la convocatoria coincidió con el tratamiento del veto del presidente Javier Milei en la Cámara de Diputados.
En Rosario la masiva convocatoria comenzó desde las 16 en plaza San Martín para, desde allí, marchar hacia Puerto Joven donde se siguió la sesión en vivo en un predio donde se desarrolla desde este miércoles la Expo Carreras con toda la oferta académica de la UNR.
6 thoughts on “La gigante marcha que golpea la burbuja del gobierno. Así se vivió la Marcha Federal en el País”
The article vividly captures the energy and tension of the March Federal Universitaria, highlighting police clashes and widespread participation. Its inspiring to see such massive solidarity, but frustrating that peaceful protests meet such force. A powerful reminder of ongoing struggles.
Anavar Cycle For Bodybuilders In Each Level: Beginner To
Advanced
Comparing the Before and the After: Anavar Results in Bodybuilding
Cycles
When a bodybuilder starts an Anavar cycle, the most noticeable change is often how quickly muscle definition becomes visible.
In the first week or two, athletes report a mild lift in strength
and a slight reduction in water retention. By
the fourth to sixth week, the gains are more pronounced: lean muscle mass increases by 2–4 kg
while body fat percentages drop from around 12% to roughly 8%.
The visual difference after completing an 8‑week cycle is typically a sharper V‑shape and more defined
abs, with athletes feeling both stronger in the gym and lighter
on their feet.
An Anavar Cycle for Each Bodybuilding Level and Proper
Ways to Run Them
Beginner: A short 4‑week cycle (30 mg/day) is enough to get accustomed to the drug’s effects without overwhelming the body.
Intermediate: An 8‑week cycle at 60–80 mg/day allows for
noticeable lean mass gains while keeping side‑effects low.
Advanced: A longer 12‑week cycle, sometimes split into two 6‑week phases (90 mg/day
followed by 120 mg/day), can push cutting results to the
next level, especially when paired with a high‑protein diet and strict cardio regimen.
Anavar for Women in Bodybuilding : Dosage and Cycle Recommendations
Women typically start at 10–20 mg/day due to lower androgen sensitivity.
A 6‑week cycle is common, with doses tapering from 20 mg down to 10 mg in the last week
to mitigate any virilizing effects. The focus for women is on preserving muscle mass
while shedding fat, so a moderate calorie deficit combined
with resistance training yields the best outcomes.
Comparing Real Anavar vs Alternatives: Which is A Better
Choice for Bodybuilders?
Authentic Anavar (Oxandrolone) offers predictable pharmacokinetics and minimal liver strain compared to synthetic analogs marketed as “Anavar.” Alternative products often contain fillers or other anabolic steroids, increasing
risk of side‑effects. For serious competitors,
genuine Anavar provides a cleaner, more reliable profile
for cutting phases.
The Effects of Anavar Before and After Cycle Utilization in Bodybuilding
Pre‑cycle: Athletes typically experience improved protein synthesis rates and reduced muscle breakdown during intense training.
Post‑cycle: The body needs a recovery period; some users report mild fatigue or temporary loss
of strength until natural testosterone production fully rebounds.
Proper post‑cycle therapy (PCT) can accelerate
recovery.
Defining Anavar and its Uses in Various Bodybuilding Levels
Anavar is an oral anabolic steroid with low androgenic activity,
making it suitable for cutting cycles across all levels:
beginners use it to ease into performance
enhancement; intermediates use it for moderate lean gains; advanced users combine it
with other agents to maximize muscle retention while shedding
fat.
Anavar Cycle Dosage for Beginners
Duration: 4 weeks
Dose: 30 mg/day (morning and evening)
Focus: Familiarize with side‑effects, monitor liver enzymes, keep diet lean.
Oxandrolone Dose for Intermediate Bodybuilders
Duration: 8 weeks
Dose: 60–80 mg/day split into two equal doses (12 pm & 7 pm)
Monitoring: Blood pressure and cholesterol levels weekly.
Advanced Anavar Dosage for Cutting
Duration: 12 weeks, divided into 6‑week phases
Phase 1: 90 mg/day (30 mg qAM + 60 mg qPM)
Phase 2: 120 mg/day (40 mg qAM + 80 mg qPM)
Nutrition: 2.5–3 g protein/kg body weight, calorie deficit of 500 kcal/day.
The Proper Anavar Dosage in Combined Cycles for Bodybuilding
When stacking with other steroids (e.g., Testosterone Propionate),
keep total anabolic load below 200 mg/day to reduce liver
burden. A typical stack:
Anavar: 60–80 mg/day
Testosterone: 100 mg/week (injected)
Supplement: L‑carnitine and branched‑chain amino acids for recovery.
Intermediate: “Lean Builder” – 8‑week medium dose,
moderate cardio.
Advanced: “Max Cut” – 12‑week high dose, intense
cardio and strict diet.
Steroids to Avoid Stacking with Oxandrolone when Cutting
High‑androgenic steroids (e.g., Trenbolone) increase liver strain and cardiovascular risk.
Steroids requiring frequent injections (e.g., Deca‑Durabolin) add complexity
and potential side‑effects that can counter Anavar’s
benefits during cutting phases.
Conclusion
Anavar is a versatile tool for bodybuilders at all stages, especially when used correctly within the appropriate dosage and cycle length.
By tailoring intake to experience level, monitoring health markers,
and pairing with disciplined nutrition and training, athletes can achieve impressive lean muscle gains while minimizing
adverse effects.
Related Posts
How to Structure Your Protein Intake During a Cutting Cycle
The Role of Cardio in Maximizing Anavar Results
Post‑Cycle Therapy: Best Practices for Testosterone Recovery
The article vividly captures the energy and tension of the March Federal Universitaria, highlighting police clashes and widespread participation. Its inspiring to see such massive solidarity, but frustrating that peaceful protests meet such force. A powerful reminder of ongoing struggles.
Anavar Cycle For Bodybuilders In Each Level: Beginner To
Advanced
Comparing the Before and the After: Anavar Results in Bodybuilding
Cycles
When a bodybuilder starts an Anavar cycle, the most noticeable change is often how quickly muscle definition becomes visible.
In the first week or two, athletes report a mild lift in strength
and a slight reduction in water retention. By
the fourth to sixth week, the gains are more pronounced: lean muscle mass increases by 2–4 kg
while body fat percentages drop from around 12% to roughly 8%.
The visual difference after completing an 8‑week cycle is typically a sharper V‑shape and more defined
abs, with athletes feeling both stronger in the gym and lighter
on their feet.
An Anavar Cycle for Each Bodybuilding Level and Proper
Ways to Run Them
Beginner: A short 4‑week cycle (30 mg/day) is enough to get accustomed to the drug’s effects without overwhelming the body.
Intermediate: An 8‑week cycle at 60–80 mg/day allows for
noticeable lean mass gains while keeping side‑effects low.
Advanced: A longer 12‑week cycle, sometimes split into two 6‑week phases (90 mg/day
followed by 120 mg/day), can push cutting results to the
next level, especially when paired with a high‑protein diet and strict cardio regimen.
Anavar for Women in Bodybuilding : Dosage and Cycle Recommendations
Women typically start at 10–20 mg/day due to lower androgen sensitivity.
A 6‑week cycle is common, with doses tapering from 20 mg down to 10 mg in the last week
to mitigate any virilizing effects. The focus for women is on preserving muscle mass
while shedding fat, so a moderate calorie deficit combined
with resistance training yields the best outcomes.
Comparing Real Anavar vs Alternatives: Which is A Better
Choice for Bodybuilders?
Authentic Anavar (Oxandrolone) offers predictable pharmacokinetics and minimal liver strain compared to synthetic analogs marketed as “Anavar.” Alternative products often contain fillers or other anabolic steroids, increasing
risk of side‑effects. For serious competitors,
genuine Anavar provides a cleaner, more reliable profile
for cutting phases.
The Effects of Anavar Before and After Cycle Utilization in Bodybuilding
Pre‑cycle: Athletes typically experience improved protein synthesis rates and reduced muscle breakdown during intense training.
Post‑cycle: The body needs a recovery period; some users report mild fatigue or temporary loss
of strength until natural testosterone production fully rebounds.
Proper post‑cycle therapy (PCT) can accelerate
recovery.
Defining Anavar and its Uses in Various Bodybuilding Levels
Anavar is an oral anabolic steroid with low androgenic activity,
making it suitable for cutting cycles across all levels:
beginners use it to ease into performance
enhancement; intermediates use it for moderate lean gains; advanced users combine it
with other agents to maximize muscle retention while shedding
fat.
Anavar Cycle Dosage for Beginners
Duration: 4 weeks
Dose: 30 mg/day (morning and evening)
Focus: Familiarize with side‑effects, monitor liver enzymes, keep diet lean.
Oxandrolone Dose for Intermediate Bodybuilders
Duration: 8 weeks
Dose: 60–80 mg/day split into two equal doses (12 pm & 7 pm)
Monitoring: Blood pressure and cholesterol levels weekly.
Advanced Anavar Dosage for Cutting
Duration: 12 weeks, divided into 6‑week phases
Phase 1: 90 mg/day (30 mg qAM + 60 mg qPM)
Phase 2: 120 mg/day (40 mg qAM + 80 mg qPM)
Nutrition: 2.5–3 g protein/kg body weight, calorie deficit of 500 kcal/day.
The Proper Anavar Dosage in Combined Cycles for Bodybuilding
When stacking with other steroids (e.g., Testosterone Propionate),
keep total anabolic load below 200 mg/day to reduce liver
burden. A typical stack:
Anavar: 60–80 mg/day
Testosterone: 100 mg/week (injected)
Supplement: L‑carnitine and branched‑chain amino acids for recovery.
Anavar for Women Dosage
Start at 10 mg/day, increase to 20 mg/day after two weeks
if no adverse effects.
Cycle length: 6 weeks, tapering down in the final week.
Pair with a moderate protein intake (1.5 g/kg) and
resistance training focused on compound lifts.
The Different Cycles that Can be Done with Anavar for each Bodybuilding Level
Beginner: “Starter Cut” – 4‑week low dose, minimal cardio.
Intermediate: “Lean Builder” – 8‑week medium dose,
moderate cardio.
Advanced: “Max Cut” – 12‑week high dose, intense
cardio and strict diet.
Steroids to Avoid Stacking with Oxandrolone when Cutting
High‑androgenic steroids (e.g., Trenbolone) increase liver strain and cardiovascular risk.
Steroids requiring frequent injections (e.g., Deca‑Durabolin) add complexity
and potential side‑effects that can counter Anavar’s
benefits during cutting phases.
Conclusion
Anavar is a versatile tool for bodybuilders at all stages, especially when used correctly within the appropriate dosage and cycle length.
By tailoring intake to experience level, monitoring health markers,
and pairing with disciplined nutrition and training, athletes can achieve impressive lean muscle gains while minimizing
adverse effects.
Related Posts
How to Structure Your Protein Intake During a Cutting Cycle
The Role of Cardio in Maximizing Anavar Results
Post‑Cycle Therapy: Best Practices for Testosterone Recovery
anabolic androgenic steroids|0ahukewjvl8zlm5bnahxuqs0khfdpc3eq4dudcao
References:
difference between Steroids and hgh (alelo.org)
steroids vs testosterone boosters
References:
bulking cycle stack; https://rymmusic.com/jonil257633995,
anabolic steroids research
References:
Buy anabolics
bodybuilders and steroids
References:
how to make steroid powder (git.dsvision.net)